PoE has a maximum distance of about 100 metres, right? Wrong! Our new PoE Max unit allows power and data to be transmitted an extra 100 metres. Even better, two units can be connected together to give a maximum transmission distance of up to 300 metres over CAT5E cable. That's PoE power and data for your IP cameras up to 300 metres.
To achieve the 300 metre distance, simply place the first PoE Max unit 100 metres from your PoE source, the second PoE Max unit goes another 100 metres down the line and your device (IP camera or any other PoE network device) 100 metres from that.
Full copper CAT5E cable needs to be used and terminated in the T-568A or T-568B standard. PoE Max will supply between 7-9 Watts of PoE power at the very end of the run providing the CAT5E and termination is of good quality.
No additional power is required and no complicated configuration, simply connect the RJ45 from your network cable directly into the PoE Max unit and it works!
Package contents: 1x PoE Max unit & instructions
- Additional Information
Manufacturer part number POEMAX-100 Brand No