Welcome

Connectors

Grid List

Set Descending Direction

1-10 of 24

Page:
  1. 1
  2. 2
  3. 3
  1. Twist on BNC connector
    Twist on BNC connector for RG59 cable. Single unit, picture shows two sides of the same unit. Learn More
  2. 1 input to 8 outputs HDMI splitter
    Send video from a single HDMI source to eight monitors with the 1 input / 8 output HDMI splitter. The unit supports video resolution up to 1080p and has gold plated connectors for a reliable signal. The unit is fully plug and play and support HDMI 1.4. Status LEDs are mounted on the front of the unit. Comes with a 5V PSU. Learn More
  3. 1 input to 4 outputs HDMI splitter
    Send video from a single HDMI source to four monitors with the 1 input / 4 output HDMI splitter. The unit supports video resolution up to 1080p and has gold plated connectors for a reliable signal. The unit is fully plug and play and support HDMI 1.4. Status LEDs are mounted on the front of the unit. Comes with a 5V PSU. Learn More
  4. 1 input to 2 outputs HDMI splitter
    Send video from a single HDMI source to two monitors with the 1 input / 2 output HDMI splitter. The unit supports video resolution up to 1080p and has gold plated connectors for a reliable signal. The unit is fully plug and play and support HDMI 1.4. Status LEDs are mounted on the front of the unit. Comes with a 5V PSU. Learn More
  5. Single channel ground loop isolator
    The unit can reduce interference on CCTV cable. Connect the unit in line with the cable via BNC connectors and any excess voltage on the line will be reduced. Learn More
  6. RJ45 to RJ45 network cable coupler
    Easily connect two network cables together using this straight through connector. This item does not boost signal, it simply allows two cables to be connected together for simple extension. Learn More
  7. USB over UTP CAT5E extender pair
    Extend the range on your USB device up to 30 metres with this USB over UTP CAT5E adapter. Supplied as a transmitter and a receiver pair, simply connect your USB device (mouse, etc) to the transmitter and connect the DVR, NVR or computer to the receiver. Connect the CAT5E cable to the Tx and Rx using RJ45 connectors. Learn More
  8. VGA over CAT5 Adapter (up to 30 metres)
    Supplied as a pair, this product allows VGA video to be transmitted over CAT5E cable up to 30 metres. One unit plugs into your monitor and one into the video source (DVR). The CAT5E cable should be terminated in either the T-568A or T-568B standards for proper operation. Learn More
  9. AV (CVBS) to VGA video converter

    This unit allows CVBS (analogue) video signal to be displayed on a VGA monitor. The unit has a BNC input VGA output for connection to a monitor.

    Learn More
  10. VGA video to AV (CVBS) video converter

    This unit allows VGA video signal to be displayed on CVBS or BNC monitors. The unit has a VGA input and female RCA output for connection to a monitor. If the unit is to be connected to a BNC monitor, we recommend a male RCA to female BNC connector which can be found here. The converter also has a VGA output which allows an additional VGA monitor to be attached as well as the CVBS monitor. S-Video is also available. The unit supports PAL and NTSC modes selectable via dip switches.

    Learn More

Grid List

Set Descending Direction

1-10 of 24

Page:
  1. 1
  2. 2
  3. 3