Welcome

Network Switches

Grid List

Set Descending Direction

7 Item(s)

  1. PRO-View 9 Port switch with 8 ports PoE

    9 port 10/100Mbps unmanaged PoE switch, desktop design, IEEE802.3AF PoE standard provides 15.4W per port at the switch. 8 of the 9 ports are PoE, the 9th (non PoE) port is for connection to your NVR / network.

    Data sheet

    Learn More
  2. PRO-View 5 Port switch with 4 ports PoE

    5 port 10/100Mbps unmanaged PoE switch, desktop design, IEEE802.3AF PoE standard provides 15.4W per port at the switch. 4 of the 5 ports are PoE, the 5th (non PoE) port is for connection to your NVR / network.

    Data sheet

    Learn More
  3. 24 Port 10/100Mbps PoE switch with 4 Gigabit Non PoE ports

    Provides 24 10/100Mbps ports that supports 802.3at/af-compliant PoE, with a total PoE power supply up to 180W, powerful and flexible enough for users to deploy wireless access points or IP-based network surveillance cameras. The switch also comes equipped with 4 10/100/1000Mbps RJ45 ports and 2 combo SFP slots, expanding your network flexibly. In addition, it provides high performance, enterprise-level QoS, useful security strategies and rich layer 2 management features

    Data sheet

    Learn More
  4. TP-Link TL-SF1005D 5 port 10/100Mbps non PoE switch

    5 10/100Mbps Auto-Negotiation RJ45 ports, Supports Auto MDI / MDIX, Green Ethernet technology saves the power up to 68%, IEEE 802.3x flow control provides reliable data transfer, Plastic case, desktop design, Plug and play, no configuration required

    Data sheet

     

    Learn More
  5. TP-Link TL-SF1016D 16 Port 10/100Mbps non PoE switch

    16 10/100Mbps Auto-Negotiation RJ45 ports, Supports Auto MDI / MDIX, Green Ethernet technology saves the power up to 80%, IEEE 802.3x flow control provides reliable data transfer, Plastic case, desktop or wall-mounting design, Plug and play, no configuration required

    Data sheet

    Learn More
  6. TrendNet TEG-S224 26 Port Managed non PoE Switch

    24 x 10/100Mbps Auto-negotiation MDIX Fast Ethernet Ports, 2 x 10/100/1000Mbps Auto-negotiation, Auto-MDIX Gigabit Ports, Full/Half duplex transfer mode for each port (full duplex mode only for Gigabit), Store and Forward switching method, 8.8 Gbps Switching Fabric, Integrated address Look-Up Engine with 8K absolute MAC address table, Supports 2.5MB RAM data buffering, IEEE 802.3x flow control for Full Duplex mode, Back pressure flow control for Half Duplex mode, Extensive Front-Panel Diagnostic LEDs, Standard 19” Rack-mount design

    Data sheet

    Learn More
  7. PoE MAX data and power extender for IP CCTV
    PoE has a maximum distance of about 100 metres, right? Wrong! Our new PoE Max unit allows power and data to be transmitted an extra 100 metres. Even better, two units can be connected together to give a maximum transmission distance of up to 300 metres over CAT5E cable. That's PoE power and data for your IP cameras up to 300 metres. To achieve the 300 metre distance, simply place the first PoE Max unit 100 metres from your PoE source, the second PoE Max unit goes another 100 metres down the line and your device (IP camera or any other PoE network device) 100 metres from that. Full copper CAT5E cable needs to be used and terminated in the T-568A or T-568B standard. PoE Max will supply between 7-9 Watts of PoE power at the very end of the run providing the CAT5E and termination is of good quality. Package contents: 1x PoE Max unit & instructions Learn More

Grid List

Set Descending Direction

7 Item(s)