Welcome

Power

Grid List

Set Descending Direction

1-10 of 12

Page:
  1. 1
  2. 2
  1. 12V DC / 1Amp inline PSU
    230V AC to 12V DC, 1Amp inline PSU, ideal for a single camera, dimensions: 100 x 50 x 30mm Learn More
  2. RGL CP1230/SM 12V DC / 3Amp Inline PSU
    12V DC Switchmode Power Supply Unit, 3 Amp Load, Encapsulated, Fitted with 3 Pin Plug & 1m of Mains Cable, 2.1mm Jack Plug & 1m of Mains Cable, No Battery Back Up, dimensions: 110x48x32mm (HxWxD) Learn More
  3. RGL CP1230/SM 12V DC / 5Amp Inline PSU
    12V DC Switchmode Power Supply Unit, 5 Amp Load, Encapsulated, Fitted with 3 Pin Plug & 1m of Mains Cable, 2.1mm Jack Plug & 1m of Mains Cable, No Battery Back Up, dimensions: 110x48x32mm (HxWxD) Learn More
  4. RGL CP12-4 Multi Fused Boxed 12V / 3Amp PSU

    12V DC Switchmode Power Supply Unit, 3 Amp Maximum Load, Hinged Lid Design, 4 x 1Amp Output Fuses, Fuse Blown Indicators, No Battery Back Up, Dimensions: 205 x 165 x 55mm (HxWxD)

    Data sheet

    Learn More
  5. RGL CP12-8 Multi Fused Boxed 12V / 5Amp PSU

    12V DC Switchmode Power Supply Unit, 5 Amp Load, Hinged Lid Design, 8 x 0.5Amp Output Fuses, Fuse Blown Indicators, No Battery Back Up, Dimensions: 205 x 205 x 55mm (HxWxD)

    Data sheet

    Learn More
  6. RGL CP12-10 Multi Fused Boxed 12V / 10Amp PSU

    12V DC Switchmode Power Supply Unit, 10 Amp Load, Hinged Lid Design, 10 x 1Amp Output Fuses, Fuse Blown Indicators, No Battery Back Up, Dimensions: 240 x 200 x 55mm (HxWxD)

    Data sheet

    Learn More
  7. RGL CP12-16 Multi Fused Boxed 12V / 10Amp PSU

    12V DC Switchmode Power Supply Unit, 10 Amp Load, Hinged Lid Design, 16 x Replaceable Output Fuses, Fuse Blown Indicators, No Battery Back Up, Dimensions: 240 x 200 x 50mm (HxWxD)

    Data sheet

    Learn More
  8. PoE MAX data and power extender for IP CCTV
    PoE has a maximum distance of about 100 metres, right? Wrong! Our new PoE Max unit allows power and data to be transmitted an extra 100 metres. Even better, two units can be connected together to give a maximum transmission distance of up to 300 metres over CAT5E cable. That's PoE power and data for your IP cameras up to 300 metres. To achieve the 300 metre distance, simply place the first PoE Max unit 100 metres from your PoE source, the second PoE Max unit goes another 100 metres down the line and your device (IP camera or any other PoE network device) 100 metres from that. Full copper CAT5E cable needs to be used and terminated in the T-568A or T-568B standard. PoE Max will supply between 7-9 Watts of PoE power at the very end of the run providing the CAT5E and termination is of good quality. Package contents: 1x PoE Max unit & instructions Learn More
  9. Single Female to Dual Male low voltage power splitter
    Single 2.1mm female DC connector to 2x 2.1mm male DC connectors. Allows power from a single PSU to be shared to two devices. Ideal when using a camera and a separate microphone when both require power. Always ensure that sufficient current is being provided from the PSU for all connected devices. Learn More
  10. Single channel ground loop isolator
    The unit can reduce interference on CCTV cable. Connect the unit in line with the cable via BNC connectors and any excess voltage on the line will be reduced. Learn More

Grid List

Set Descending Direction

1-10 of 12

Page:
  1. 1
  2. 2