Welcome

Call Points

Grid List

Set Descending Direction

1-10 of 14

Page:
  1. 1
  2. 2
  1. Hochiki HCP-E(SCI) Call Point with SCI Red
    Model HCP-E(SCI) is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing* for communications polling and is continuously lit when the HCP-E(SCI) is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required (sold separately). An optional glass element is also available. *Fire alarm control panel compatibility is required for this feature. Learn More
  2. Hochiki HCP-W(SCI) Weatherproof Addressable Call Point with SCI Red
    Model HCP-W(SCI) is a weatherproof Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing* for communications polling and is continuously lit when the HCP-W(SCI) is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available. *Fire alarm control panel compatibility is required for this feature. Learn More
  3. Hochiki PS200 Hinged Cover Call Point
    An acylic hinged cover for the HCP-E(SCI) manual call point range which protects against accidental operation/vandalism Learn More
  4. Hochiki CCP-W Weatherproof Conventional Call Point Red
    The CCP-W is a Conventional call-point based upon the industry standard KAC world series housing and features easy to install, push-fit wiring terminals. The unit can support either a ‘Frangible Glass’ element or a ‘Non Frangible Plastic’ element and features a weatherproof Housing to IP67, which means it can be mounted in the most severe environmental conditions without water ingress. Learn More
  5. Hochiki CCP-SAVWIRE Conventional Savwire Call Point Red
    The CCP-SAVWIRE is a Conventional call-point based upon the industry standard KAC world series housing and features easy to install, push-fit wiring terminals. The unit has been specifically designed for use on “Savwire” (two-wire) systems. The unit can support either a ‘Frangible Glass’ element or a ‘Non Frangible Plastic’ element. Learn More
  6. Hochiki Conventional Call Point Keyswitch 2 Position with red back box
    The CCP-KS is a red Conventional key switch manual call-point based upon the industry standard KAC 9000 series housing and features flying leads for simple wiring. The unit features two key positions marked as “1” and “0” – with the key easily removable in either position. Learn More
  7. Hochiki CCP-E-IS Intrinsically Safe Conventional Call Point Red
    The CCP-E-IS is a conventional call point based upon the industry standard KAC world series housing, and which can be used in hazardous areas. Learn More
  8. Hochiki Intrinsically Safe Weatherproof Call Point
    Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new CCP-W-IS outdoor Call Point range. Learn More
  9. Hochiki HCP-E(SCI)/SIL Analogue Manual Call Point with SCI, red case (SIL2 approved)
    Model HCP-E(SCI)/SIL is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing* for communications polling and is continuously lit when the HCP-E(SCI)/SIL is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required (sold separately). An optional glass element is also available. *Fire alarm control panel compatibility is required for this feature Learn More
  10. Hochiki HCP-W(SCI)/SIL Analogue IP67 Manual Call Point with SCI, red case (SIL2 approved)
    Model HCP-W(SCI)/SIL is a weatherproof Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing* for communications polling and is continuously lit when the HCP-W(SCI)/SIL is operated – in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available. *Fire alarm control panel compatibility is required for this feature. Learn More

Grid List

Set Descending Direction

1-10 of 14

Page:
  1. 1
  2. 2