Welcome

Detector Bases

Grid List

Set Descending Direction

10 Item(s)

  1. Hochiki YBN-R/3 Sensor Mounting Base
    Model YBN-R/3 is a Common Mounting Base, which is fully compatible with Hochiki’s ESP range of sensors. It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required. Learn More
  2. Hochiki YBN-R/3(SCI) Short Circuit Isolator Base
    Model YBN-R/3(SCI) is a sensor mounting base featuring an integral short-circuit isolator which will detect and isolate short-circuits on the loop. When a short-circuit is detected during power up the unit will drop the power to the rest of the loop. The YBN-R/3(WHT)-SCI is compatible with the ESP range of sensors and does not require a loop address. A remote fire LED facility is provided when a sensor is attached to the base. NOTE: A fitted sensor will still be powered when this device is isolating. Learn More
  3. Hochiki YBN-R/6 Conventional Mounting Base
    Model YBN-R/6 is a Conventional Detector Mounting Base associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels. It is supplied with square cable clamps for secure and reliable cable termination but the base does not provide line continuity during detector removal, therefore if Call Points are being used then these should be wired onto the zone first. The integrated third terminal provides remote indicator output. Learn More
  4. Hochiki YBN-R/6SK Conventional Schottky Base
    Model YBN-R/6SK is a Conventional Detector Mounting Base with in-line Schottky Diode, associated with the CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels. It is supplied with square cable clamps for secure and reliable cable termination and the base provides line continuity during detector removal. Therefore Call Points can be wired in any order on the zone providing a suitable panel and End Of Line (EOL) unit is used. The integrated third terminal provides remote indicator output. Learn More
  5. Hochiki CSB-E Conventional Sounder Base
    The CSB-E is platform type sounder, which will accept the CDX Range of detectors mounted with an appropriate base*. The improved electronics result in a very low current consumption with a high sound output. A set of DIL switches are used to select the unit’s tone and sound output (three settings, LOW, MEDIUM and HIGH). compatible CDX Bases* - YBN-R/6, YBO-R/6PA, YBO-R/6R, YBO-R/6RN, YBO-R/6RS, YBN-R/6SK Learn More
  6. Hochiki CSBB-E Conventional Sounder Beacon Base
    The CSBB-E is platform type sounder beacon, which will accept the CDX Range of detectors mounted with an appropriate base*. The improved electronics result in a very low current consumption with a high sound output. A set of DIL switches are used to select the unit’s tone and sound output (three settings, LOW, MEDIUM and HIGH). Advanced LED technology provides a high intensity flash. Compatible CDX Bases* - YBN-R/6, YBO-R/6PA, YBO-R/6R, YBO-R/6RN, YBO­R/6RS, YBN-R/6SK Learn More
  7. Hochiki CWSB-E Conventional Wall Sounder Beacon Red
    The CWSB-E is a conventional wall sounder beacon with improved electronic design which enables very low current consumption whilst providing a range of tones and volumes – selectable from the DIL switches on each unit. The beacon and sounder are fully synchronised. The unit is supplied with its own base, a shallow base (IP21) or a deep base (IP33). Other lens colours are available upon request. Learn More
  8. Hochiki YBN-R/4(IS) IIntrinsically Safe Detector Base
    Model YBN-R/4(IS) is a Conventional Detector Mounting Base associated with the CDX Range of Intrinsically Safe Detectors and is fully compatible with the majority of existing conventional fire alarm control panels. It is supplied with square cable clamps for secure and reliable cable termination but the base does not provide line continuity during detector removal, therefore if Call Points are being used then these should be wired onto the zone first. Learn More
  9. Hochiki YBN-UA Recess Mount Base (requires Installation Kit YYA-A)
    Model YBN-UA is a mounting adaptor for both the ESP and CDX range of ivory sensors and detectors and their associated mounting bases. The YBN-UA allows a base and head combination to be flush mounted by providing a recess fixing the ceiling. It must be used with a fixing clamp kit (YYA-1) which secures the YBN-UA within a pre-cut hole up to a maximum ceiling thickness of 30mm (sold separately). (shown with mounting base fitted - supplied separately) Learn More
  10. Hochiki YBD-RA Base Mounting Adapter
    The YBD-RA Surface Wiring Adaptor allows the majority of Hochiki Sensors/Detectors and their Mounting Bases to be fitted flush against a fixing surface whilst also allowing surface wiring (without conduit) to be connected. The adaptor features four 9mm x 8mm knock-outs for cables/wires allowing surface-fixed wiring to be connected to an appropriate mounting base (depending on application). The adaptor is moulded in ivory white ABS as standard, which allows seamless integration with the majority of mounting bases and associated sensors and detectors. Learn More

Grid List

Set Descending Direction

10 Item(s)