Programming Device For Addressable Devices 41SPG000The programmer 41SPG000 is the instrument used to assign addresses to all the devices connected in the loop (detectors, modules, manual call points and audible/visual alarms). It can read and write the addresses and to set the parameters of the detectors and modules. It is supplied with a 230 Vac, 50 Hz/ 1.5-12 Vdc, 500 mA, 6 VA (max.) power supply unit and 2 cables for connection of the modules and manual call points. It can also be powered by 4 x 1.5 V AA batteries. The detectors and audible and visual alarm devices can be directly connected to the base on the upper part of the programmer. Dimensions: 255x102x65 mm. Weight: 260 g.